FBL SPL 2000 Fast Bright Light 100W Auxiliary Projector 9000 Lumens Slim Double Lens Blue Lens Projector 12000 RPM Fan White Yellow Auxiliary Tata Nexon Lights Car Bike Auxiliary Light Car Concepts Shop
The FBL SPL 2000 is built around one idea: maximum output in a slim body. While most 100W auxiliary projectors use a tall, round housing that can clash with modern bumper designs, the SPL 2000 uses a flattened slim profile — lower visual footprint, easier fitment behind grille openings and in bumper positions where a round unit would stick out or not fit at all. The 35mm blue lens is borrowed from high-end projector design — blue lens glass produces a crisper, more defined beam pattern than standard clear glass projectors at the same wattage.
9000 lumens from 100W. A 12,000 RPM internal cooling fan that keeps the LED chips within operating temperature for sustained high-output use. Two colour variants — Lo White / Hi Yellow for all-weather capability, or Lo White / Hi White for maximum brightness on clear roads. At ₹8,999 against an MRP of ₹12,490, this is one of the better-priced 100W slim auxiliary lights available in India right now. Here is everything about it.
Two Colour Variants — Choose Before You Order
🌗
Variant 1 — Recommended
Low White · High Yellow
🔅 Low Beam: White — wide close-range road coverage
🔆 High Beam: Yellow — long-range with fog penetration
The all-conditions variant. White low beam gives clean, broad illumination for city driving and standard night use. Yellow high beam switches on the longer wavelength amber output — significantly better fog and rain penetration than white at the same wattage. North India fog, monsoon highways, dust conditions — yellow high beam handles them all.
Best for: All-weather driving · Fog · Rain · Dust · Rural roads
⚪
Variant 2 — Maximum Brightness
Low White · High White
🔅 Low Beam: White — focused close-range beam
🔆 High Beam: White — maximum distance at 6000K+
Pure white across both modes — maximum lumen output at full brightness from every watt. Blue lens enhances the white beam's crispness and contrast at distance. For drivers in predominantly clear-weather regions who want maximum forward visibility without the amber colour shift. Pairs well with 6000K LED headlamps for a consistent all-white front-end light signature.
Best for: Clear nights · Highways · City · Uniform white look
🎯 Which Variant to Order for Indian Conditions
For most Indian buyers — especially in North India (Haryana, Punjab, UP, Delhi NCR, Bihar) where winter fog from November to February is a genuine driving hazard — the Low White / High Yellow variant is the right choice. Yellow light at 3000K penetrates fog moisture with significantly less back-scatter than white — keeping the road surface visible where a white light would reflect fog particles back at you. If you drive exclusively in the South or in predominantly clear-weather urban areas and want pure maximum brightness — choose Low White / High White. Same price, both ₹8,999.
The Slim Design — Why Form Factor Matters
SPL 2000 Slim Profile vs Standard Round Auxiliary Housings
Standard Round Auxiliary
Round
Unit
Tall Round Housing
Circular cross-section — protrudes significantly from mounting surface. Can conflict with bumper lip geometry, grille opening height, and tight mounting zones on modern cars with aggressive front-end design.
FBL SPL 2000 — Slim Profile
SPL
Slim
Flattened Slim Housing
Lower vertical profile — fits behind grille bars, in narrow bumper slots, and in mounting positions where a round unit physically doesn't fit. Cleaner aesthetic on modern Indian cars.
Lower Profile · Easier Fitment
Why the Slim Profile Matters on Indian Cars
🚗
Modern Bumper Geometry
Tata Nexon, Harrier, Safari, Hyundai Creta facelift, and Maruti Grand Vitara all have sculpted, aggressive front bumpers with limited depth in the lower grille zone. A tall round auxiliary light protrudes visibly and can conflict with the plastic lip below. The SPL 2000's slim body sits within tighter clearances without looking bolted-on.
🔩
Grille Mounting
Mounting behind a grille requires clearing the grille bar height. Many modern Indian car grilles have horizontal bars spaced 40–55mm apart. A round auxiliary with 80mm+ diameter blocks multiple bars or must mount in front of the grille. The slim SPL 2000 fits between or just behind grille bars cleanly.
✨
Cleaner Visual Aesthetic
A slim rectangular or oval auxiliary light reads as intentional design — similar in proportion to factory auxiliary lights on European cars. A large round unit reads as an afterthought bolted to the bumper. If front-end aesthetics matter alongside performance, the slim form factor is the right choice.
🏍️
Motorcycle Fitment
On motorcycles, a slim auxiliary light creates less aerodynamic drag and occupies less frontal area than a round unit. For fork-leg or handlebar mounting on Royal Enfield, KTM Adventure, or Himalayan, the slim profile is easier to position and less intrusive at highway speeds.
12,000 RPM Cooling Fan — The Number That Matters
Three-Stage Thermal Management — How the SPL 2000 Runs Cool
💡
LED Chip Heat Generation
100W through LED chips generates significant thermal energy at the chip junction. Uncooled, chip temperature rises until LED throttles output or fails permanently within minutes at full load.
🏗️
Aluminium Heat Sink
Cast aluminium heat sink conducts heat away from the chip junction — aluminium's thermal mass absorbs rapid spikes and distributes heat across the fin surface area. First stage of thermal management.
🌀
12,000 RPM Active Fan
High-speed fan forces air over heat sink fins continuously — convective cooling removes heat faster than passive radiation alone. At 12,000 RPM, airflow through the fins is sufficient to maintain chip temperatures within spec for sustained 100W operation.
🌡️ Why 12,000 RPM Specifically Matters in India
Indian auxiliary light use puts unusually high thermal demands on LED systems. A car parked in direct sun on a 45°C day in Rajasthan or Maharashtra reaches 70–80°C inside a closed bumper cavity before the engine starts. Add 100W of LED operation and chip junction temperatures must still stay within the LED manufacturer's specification. The SPL 2000's 12,000 RPM fan starts cooling the moment the light is switched on — before the aluminium heat sink mass is saturated. This pre-emptive cooling approach is why the SPL 2000 maintains consistent 9000LM output from the first minute to the hundredth minute of operation, rather than throttling down as chip temperature rises.
Blue Lens — What It Does to the Beam
35mm Blue Lens — Engineering Purpose
🔵
Blue Lens Glass — Beam Crispness
Blue-tinted optical glass increases the apparent contrast of the white beam against the dark road surface — the beam edge appears sharper and the hotspot more defined than through a clear lens of identical geometry. The subjective impression at the driver's eye is a crisper, more premium-looking beam pattern.
💠
Colour Temperature Shift
Blue lens glass filters some of the warm wavelengths from the LED output — producing a slightly cooler colour temperature than the bare LED. On a white-beam variant, this pushes the output closer to 6000K cool daylight white. On yellow high beam, the blue lens reduces the warmth slightly — the output is a sharper amber rather than deep golden.
🎯
Focused Projector Pattern
The 35mm projector lens design creates a controlled, shaped beam rather than the uncontrolled scatter of a reflector housing. The beam has a defined upper cut-off — limiting upward scatter that creates glare for oncoming drivers — and a concentrated forward throw that puts light where it matters.
SPL 2000 vs Other Auxiliary Options at This Price
Round Auxiliary — Same Price
Generic 100W Round Auxiliary
-
💡100W — similar output
-
❌Round housing — fitment issues
-
⚠️Often no active fan — passive only
-
❌Single colour only
-
❌No brand warranty typically
✦ FBL SPL 2000
FBL SPL 2000 Slim
-
✅100W · 9000LM — genuine output
-
✅Slim body — fits modern bumpers
-
✅12,000 RPM active fan cooling
-
✅Two colour variants — buyer chooses
-
✅1-year FBL brand warranty
Step Up
DHC Pulse Pro / IPH U2-3S
-
✅Tata-specific / Universal
-
✅IP67 / Tri-colour option
-
✅Projector cut-off — anti-glare
-
📉Round body — less slim profile
-
💰₹8,999 — same price bracket
🎯 Who the FBL SPL 2000 Is Ideal For
The SPL 2000 is the right choice for buyers who specifically want a slim-form auxiliary — either because their bumper or grille cannot accommodate a round unit, or because they prefer the cleaner visual line of a flat projector on modern Indian car designs. The active 12,000 RPM fan makes it suitable for sustained highway and off-road use without output degradation. The two colour variant choice makes it adaptable to both all-weather and clear-weather requirements. At ₹8,999 against MRP ₹12,490, it represents genuine value at this specification level.
Frequently Asked Questions
Which colour variant should I choose — Low White High Yellow or Low White High White?
If you drive in North India (Haryana, Punjab, Delhi NCR, UP) during winter, or anywhere in India during monsoon season — choose Low White / High Yellow. The yellow high beam penetrates fog and rain significantly better than white, keeping the road surface visible in conditions where white light creates a blinding reflected wall of moisture back at you. If you drive primarily in clear weather and want maximum brightness and a uniform white front-end appearance — choose Low White / High White. Both variants deliver the same 100W / 9000LM output — only the high beam colour differs.
Does the SPL 2000 fit inside a factory fog lamp slot?
No — the FBL SPL 2000 is an external auxiliary light. It mounts on the grille, bumper, roll bar, or motorcycle fork using a bracket — it does not replace your factory fog lamp unit. If you want a fog slot replacement (projector that fits inside the factory fog housing), look at the DHC Pulse Pro (₹9,199 — Tata specific), Aozoom AZ-TA25 (₹12,450 — Tata facelift), or AES FX-3 (₹12,490 — universal 3-inch fog slot). The SPL 2000 works as an additional forward light supplementing your existing headlamps and fog lights.
What wiring is required for installation?
The SPL 2000 requires a dedicated relay circuit from the battery — not a direct connection to existing fog lamp wiring, which is typically rated for 55W halogen and would be overloaded by 100W. You need: a 30-amp relay, a 15-amp inline fuse, power and ground wires from battery to relay, signal wire from a switched 12V source (ignition-on or fog switch) to the relay trigger, and output wires from relay to the SPL 2000. The DHC Wiring Kit (₹2,699) available at Car Concepts Shop includes all these components in one ready-to-connect package. A local car electrician installs the complete wiring circuit in 30–45 minutes.
Is the SPL 2000 waterproof — will it handle monsoon rain?
The SPL 2000 is described as weather-resistant — designed to withstand rain, splash, dust, and outdoor use in Indian conditions. It is not specifically IP67 rated (that certification requires independent laboratory testing and explicit documentation). For most Indian driving use — monsoon rain, road spray, high-pressure washing from a reasonable distance — the SPL 2000's weatherproofing is adequate. For extreme applications — river crossings, agricultural use with direct mud and water submersion — consider IP67-rated options like the IPH U2-3S (₹8,999). For standard highway, city, and light off-road use, the SPL 2000's weather resistance is fully sufficient.
Can I fit the SPL 2000 on my motorcycle?
Yes — the SPL 2000 is explicitly compatible with bikes alongside cars. The DC 9–16V input is standard 12V motorcycle electrical. The slim form factor creates less aerodynamic drag and is easier to position on fork legs and handlebar clamps than round units. Mount with the included bracket on your fork leg or a handlebar clamp (sold separately), wire through a relay from the motorcycle battery, and connect to a handlebar-mounted toggle switch. Professional installation recommended for motorcycles to ensure vibration-resistant mounting and clean waterproofed wiring connections.
What does the 1-year warranty cover and how do I claim it?
The FBL SPL 2000 carries a 1-year manufacturer warranty from FBL (Fast Bright Light) covering manufacturing defects — LED failure, cooling fan malfunction, housing seal failure, or electrical component failure under normal use conditions. Physical damage from accidents, incorrect wiring, or water ingress due to improper installation is not covered. To initiate a warranty claim, WhatsApp Car Concepts Shop at +91 97287 64403 with your order number, a description of the issue, and a photo or video showing the defect. We process all warranty claims directly as your point of purchase.
Available Now · Same Day Dispatch · 1-Year Warranty
FBL SPL 2000 — Slim Double-Lens Auxiliary
100W · 9,000LM · 35mm Blue Lens · 12,000 RPM Fan · Aluminium Heat Sink · DC 9–16V · Cars & Bikes · Choose Your Colour Variant
MRP ₹12,490 ₹8,999 Save ₹3,491
100% Genuine FBL · Pan India Shipping · Same-Day Dispatch · OTP Verified Delivery