Morel MPD 1.500 Mono Amplifier - Powerful Car Bass Performance
Enhance Your Car Audio with the Morel MPD 1.500
The Morel MPD 1.500 Mono Amplifier is designed to deliver deep, resonant bass for subwoofers. With 350W x 1 at 4 ohms and 550W x 1 at 2 ohms, this compact amplifier ensures high-quality sound without taking up valuable space in your vehicle. Variable low-pass and sub-sonic crossovers allow for precise tuning, while Total Harmonic Distortion (THD) below 0.2% maintains crystal-clear audio. Built-in protection circuits guarantee reliable, long-lasting performance.
Technical Specifications
| Brand | Morel |
|---|---|
| Amplifier Type | Mono |
| Series | MPD Series |
| Class | Class D |
| RMS Wattage @ 2 ohms | 550W x 1 |
| RMS Wattage @ 4 ohms | 350W x 1 |
| Bass Control Remote | No |
| Warranty Period | 1 Year Manufacturer's Warranty |
| Dimensions | 1.9" x 5.83" x 7.15" |
Key Features of the Morel MPD 1.500 Amplifier
Impressive Audio Clarity
Wide frequency response of 20Hz to 30kHz and Signal-to-Noise ratio over 93dB provide premium sound quality for any car audio system.
Compact Yet Powerful Design
Engineered to fit in tight spaces, the MPD 1.500 packs remarkable power without compromising vehicle space.
Customizable Sound Tuning
Variable low-pass and sub-sonic crossovers allow for personalized audio adjustments, optimizing your bass experience.
Built-in Protection Circuitry
Advanced safeguards protect against overcurrent, short circuits, thermal issues, and internal errors, ensuring long-term reliability.
MPS-HL High-Low Level Adaptor Compatibility
All MPD Amplifiers work seamlessly with the MPS-HL high-low level adaptor (sold separately), featuring a 50-ohm load resistor to keep load-sensing factory amplifiers active and simplify installation.
Frequently Asked Questions (FAQ)
Q: Can I run a 2-Ohm subwoofer setup with the Morel MPD 1.500?
A: Yes! The Morel MPD 1.500 is fully 2-Ohm stable and delivers its maximum continuous power output of 550W RMS into a 2-Ohm load.
Q: Is this amplifier suitable for driving door/cabin speakers?
A: No, the MPD 1.500 is a dedicated monoblock (1-channel) subwoofer amplifier. It operates across low-pass frequencies (10Hz–220Hz) specifically designed for subwoofers.
Q: Why is a compact Class D monoblock amplifier beneficial for car audio?
A: Compact Class D amplifiers are highly power-efficient, converting most of the electrical current from your car's battery into audio power with very little waste as heat. Their small size makes them easy to tuck under car seats or inside hidden trunk compartments without taking up storage space.
Enhance Your Car Audio with the Morel MPD 1.500
The Morel MPD 1.500 Mono Amplifier is designed to deliver deep, resonant bass for subwoofers. With 350W x 1 at 4 ohms and 550W x 1 at 2 ohms, this compact amplifier ensures high-quality sound without taking up valuable space in your vehicle. Variable low-pass and sub-sonic crossovers allow for precise tuning, while Total Harmonic Distortion (THD) below 0.2% maintains crystal-clear audio. Built-in protection circuits guarantee reliable, long-lasting performance.
Technical Specifications
| Brand | Morel |
|---|---|
| Amplifier Type | Mono |
| Series | MPD Series |
| Class | Class D |
| RMS Wattage @ 2 ohms | 550W x 1 |
| RMS Wattage @ 4 ohms | 350W x 1 |
| Bass Control Remote | No |
| Warranty Period | 1 Year Manufacturer's Warranty |
| Dimensions | 1.9" x 5.83" x 7.15" |
Key Features of the Morel MPD 1.500 Amplifier
Impressive Audio Clarity
Wide frequency response of 20Hz to 30kHz and Signal-to-Noise ratio over 93dB provide premium sound quality for any car audio system.
Compact Yet Powerful Design
Engineered to fit in tight spaces, the MPD 1.500 packs remarkable power without compromising vehicle space.
Customizable Sound Tuning
Variable low-pass and sub-sonic crossovers allow for personalized audio adjustments, optimizing your bass experience.
Built-in Protection Circuitry
Advanced safeguards protect against overcurrent, short circuits, thermal issues, and internal errors, ensuring long-term reliability.
MPS-HL High-Low Level Adaptor Compatibility
All MPD Amplifiers work seamlessly with the MPS-HL high-low level adaptor (sold separately), featuring a 50-ohm load resistor to keep load-sensing factory amplifiers active and simplify installation.
Frequently Asked Questions (FAQ)
Q: Can I run a 2-Ohm subwoofer setup with the Morel MPD 1.500?
A: Yes! The Morel MPD 1.500 is fully 2-Ohm stable and delivers its maximum continuous power output of 550W RMS into a 2-Ohm load.
Q: Is this amplifier suitable for driving door/cabin speakers?
A: No, the MPD 1.500 is a dedicated monoblock (1-channel) subwoofer amplifier. It operates across low-pass frequencies (10Hz–220Hz) specifically designed for subwoofers.
Q: Why is a compact Class D monoblock amplifier beneficial for car audio?
A: Compact Class D amplifiers are highly power-efficient, converting most of the electrical current from your car's battery into audio power with very little waste as heat. Their small size makes them easy to tuck under car seats or inside hidden trunk compartments without taking up storage space.
Frequently bought together
