Morel MPS-R1 Premium Wired Remote Subwoofer Level Control for Morel MPS & MPD Amplifiers

Command Your Bass, Own the Drive: Effortless Subwoofer Control at Your Fingertips

Stop pulling over or leaning into your boot just to adjust your amplifier's settings. The Morel MPS-R1 Wired Remote Subwoofer Level Control is an essential dashboard accessory engineered exclusively for Morel high-performance amplifiers. Designed to bring the ultimate acoustic balance directly to the driver's seat, this heavy-duty remote dial gives you instantaneous, real-time authority over your car soundstage's low-end response, ensuring your subwoofers thump exactly how you want them to for every single track.

Performance Engineering & Key Features

Smooth Tactile Click Adjustment

The MPS-R1 is built with an incredibly satisfying, highly precise tactile clicking volume pot. Each incremental turn provides a solid physical response, making it entirely effortless to fine-tune your bass levels by feel while keeping your eyes securely glued to the road.

Substantial 20 dB Control Range

Whether you are craving massive, trunk-flexing low notes or pulling up to a quiet residential neighborhood and want to lower the acoustic presence entirely, the MPS-R1 provides a massive 20 dB adjustment window. It ranges from full-throttle bass extension right down to nearly invisible subsonic presence.

Flawless, Interruption-Free Wired Integration

Wireless remotes can introduce lag and require frequent battery replacements. The Morel MPS-R1 utilizes a hard-wired connection that draws instant power straight from your amplifier. This setup guarantees continuous, zero-latency bass modulation on the fly without a single drop in signal fidelity.

Discreet Under-Dash Surface Mount

Featuring an ultra-sleek, compact black composite housing, this remote module sits cleanly underneath your car’s dashboard console, inside the glove compartment, or flat on your central armrest rack. Its discreet profile blends seamlessly into any modern vehicle interior without disrupting your factory styling.

Seamless Amplifier Compatibility

The Morel MPS-R1 is purpose-built to communicate directly with Morel’s premium amplifier lineups. It is officially compatible with:

• Morel Performance Series Mono Amplifiers: MPS 1.550 & MPS 1.1100

• Morel Performance Series 5-Channel Amplifiers: MPS 5.950

• Morel MPD Digital Mono Amplifiers: MPD 1.500

Technical Specifications

• Adjustment Range: 0 to -20 dB

• Housing Color: Midnight Black Finish

• Chassis Construction: Automotive-Grade Impact-Resistant ABS Composite

• Installation Method: Under-dash Surface Mount via integrated mounting wings

• Included Cable Length: 16.25 Feet (4.95 Meters) Heavy-Shielded Wire

• Connector Profile: 3.5mm Stereo Jack (Amplifier End) to Modular RJ-25 Plug (Remote End)

What’s Included Inside the Box

• 1 x Morel MPS-R1 Subwoofer Level Control Module

• 1 x 16.25' Low-Loss Connection Link Cable

• 2 x Industrial-Grade Self-Tapping Installation Screws

Warranty Details

• 1-Year Official Brand Warranty: This product comes backed by a standard 1-Year (12 Months) official brand warranty covering manufacturing, structural dial defects, and internal electrical circuit performance.

• Secure Invoice Processing: Your official purchase tax invoice from Car Concepts Shop acts as your direct warranty identification track. Keep your invoice copy safe for authorized brand claims.

Frequently Asked Questions

Can I use this remote dial with other non-Morel branded amplifiers?

No. The internal resistor matrix, 3.5mm-to-RJ25 pinout mapping, and voltage-drop curves are specifically mapped out to sync only with Morel’s integrated microprocessor circuits found inside the MPS and MPD amplifier platforms. It will not function on generic amplifiers.

Do I need to run a separate power line for this bass knob?

Not at all. The corded electric setup draws all the necessary reference voltage directly from your amplifier's data interface ports. Just plug one end into the amp and the other into the remote knob using the included cable, and it works immediately.

Where is the best spot to mount the MPS-R1 knob inside my car?

Most car audio enthusiasts mount it directly under the driver’s side dashboard near the steering column or neatly inside the center console panel. The integrated side-mounting flanges and self-tapping screws allow you to bolt it down onto any hard plastic panel smoothly.

Why Choose CarConceptsShop.com

At Car Concepts Shop, we are hands-on car audio engineering specialists. From setting up immersive soundstages and calculating precision custom enclosures to choosing elite driver arrays, we thoroughly evaluate every component to give you unmatched performance on the road.

• 100% Genuine, Authenticated Morel Gear Sourcing: We source directly through verified distribution paths to ensure you receive 100% original, brand-new Morel products with intact serial numbers.

• Expert Technical System Integration: Confused about whether the MPS-R1 matches your current amplifier layout? Our expert internal tech team is always ready with clear answers.